I’ve just finished a large DIY grid mirror for my house entrance. I made it with 28 IKEA picture frames and 28 LÖNSÅS mirrors. The result is wahoo!
IKEA Materials:
- IKEA x 28 – use as many as you need to fill your space and form a square or rectangle
- (8×10″) x 28
Other materials:
- Wood strips
- Screws
- Wall fasteners
DIY industrial grid mirror hack
Step 1: Insert mirrors into frame
Open up the back of the picture frame and remove the plastic protection and back panel. You won’t need these anymore. Insert the LÖNSÅS mirror in the picture frame and close the frame accordingly. Repeat 27 times!
Related:
Step 2: Glue frames together
Place the mirrors in the grid formation you want. Then, run a down the long side of one picture frame. Press the frame with glue against the next mirror frame. Finish each row (of 4 mirrors, in my case) and then glue the rows together to get a large 4×7 grid of mirrors.
Step 3: Reinforce the grid structure
Let the glue dry thoroughly. Then carefully flip the mirror grid over, with mirrors facing downwards. You may want to lay a piece of cloth on the floor to protect the frames and mirrors. Measure the width of the row of mirrors and cut pieces of wood to size. Screw the wood pieces across the row of mirrors into the sides of the frame. Repeat on each row. Then measure the length of the grid mirror and cut wood accordingly. Screw the vertical wood pieces to the horizontal wood pieces to consolidate and reinforce the whole grid of mirrors.
Step 4: Secure to wall
I placed my DIY grid mirror against the wall and used two shutter stoppers (see inset picture) to hold the mirror to the wall. Done! (This step may be optional depending on the size of your industrial grid mirror and whether there’s a risk of it being knocked over.)
~ by Christine
The post appeared first on .
Related Posts
