Most people usually prefer to decorate their windows with curtains, blinds, or shades. But this type of window coverings not only gives you privacy but also blocks the natural sunlight.

Finding a perfect cover for your windows that will provide a degree of privacy, let the light come through, and match the interior decor can be tricky.

Confused much?

Don’t worry. In this article, I will show you 6 ways you can get window privacy without blocking light.

How To Apply Window Privacy Without Blocking Light

There are a few substitute options that will simultaneously cover your windows to give you privacy and let the light in so your house doesn’t get dark.

Let’s get into them right away.

Coverings Suitable For Home Suitable For Office
Sheer Curtains Yes Yes
Mini Blinds Yes Yes
Shade Screens Yes Yes
Frosted Glass Design Yes Yes
Faux Stained Glass Yes No
Window Film Yes No

Sheer Curtains

Some of the common sheer curtains are cotton, silk, chiffon, and voile. You can choose the fabric that matches the best with your indoor ambiance.

If you plan to decorate your room more casually, you should go with cotton. However, you can always choose silk if your room and furniture have a luxury vibe.

Installation Steps

  • Select your fabric.
  • Make sure to get the right curtain hardware.
  • According to your curtain material, you can choose a thinner or heavier rod.
  • Select the rod design that matches your room’s decoration.
  • You can hang sheer curtains with a thicker curtain to add additional privacy.
  • You can hang multiple panels side by side to create an elegant look.

Mini Blinds

Mini blinds are an amazing example of window privacy coverings. They can be adjusted in such angles that they will prevent people from peeking in your house and let the sunlight in at a time.

For installing mini blinds, you will need a steel measuring tape, a pencil, a level tool, ¼ hex screwdriver, a power drill, and a hammer.

Installation Steps

  • Place your mountain bracket in the desired location and make screw holes with a pencil and drill.
  • Tighten the screws to secure your bracket.
  • Use a steel measuring tape to confirm the right angle and placement.
  • Snap the valance clips and slide the headrail into the bracket.
  • Snap the valance again into the clips. 

Shade Screens

If you are planning to decorate your windows, you must have heard of shade screens. They are also called solar screens because they create more than just privacy.

Shade screens block a significant amount of UV rays from entering your room. In the daytime, they will provide you a 100% privacy. However, the room can be partially visible at night if any lights are on inside.

Installation Steps

  • Find a suitable spot and make screw holes for the bracket.
  • Use a drill, a hammer, and a carpenter saw to make the holes.
  • Nail down the bracket leaving sufficient space for the rolled shade screen.
  • Install the shade into the brackets.
  • Make sure the screen rolls up fully once you release it. If it doesn’t, take it off the bracket, roll it up, and install the shade again.

Frosted Glass Design

Although frosted glasses provide super privacy, they also block the view completely from the inside. But they still let the light in, so if you don’t worry much about looking outside while keeping your windows closed, this is a great choice for you.

You can easily design your own version of frosted glass with low-tack tapes or even frosted glass spray paint.

Installation Steps

  • Draw the design you want on a piece of cardboard.
  • Cut out the lines and make a frame out of them.
  • Put the frame on the window glass and spray in between the shapes to make the glass frosty.
  • You can also cut out low-tack tapes and stick them to your windows according to the frame design.

Faux Stained Glass

Stained glasses in windows add a pop of color to your rooms and filter the light uniquely and beautifully. Not to mention they add supreme privacy to your house.

Installation Steps

  • First, you need to buy some Artscape window film to make stained glass.
  • Clean the windows with glass cleaner.
  • Measure the material according to your window sizes and cut them.
  • Spray the entire window with soap water.
  • Place the window film on the lining up square with the top and left sides.
  • Use a squeegee to remove extra water and air bubbles.
  • Cut the access film along the sides and wipe out any water left.

Window Film

Window films are made out of cling film and add a touch of decoration to your entire room. They stick to the inside of a window and prevent direct viewing inside the room.

Installing window films requires no tools, and they can be removed at any time.

Installation Steps

  • Select the right window film that matches your taste.
  • Follow the instruction manual to clean and dry off the window glass.
  • Cut the film according to the window size and leave ½ inch extra all around.
  • Remove the film backing and wet the film before placing it on the window.
  • Use a squeegee to get rid of bubbles.
  • Carefully trim the extra film.

Which Method Should You Go for?

By now, you probably have found the perfect window covering that fits your decoration preferences and will let light in your room while maintaining privacy.

However, keeping your side of the story in mind, I have prepared a few suggestions to let you know which method would fit you best.

If Budget is a Concern

If you are trying to get a protective shield for your window that will ensure privacy and lighting but are really short on your budget, I suggest you go with the window film option.

Window films are cheap to buy, and you don’t need any additional tools to incorporate them into your windows.

You can simply order film rolls online and then follow the steps to stick them to your windows.

If Time is a Concern

Most adults have a full-time job or a business to run, right? So, when it comes down to decorating your house, time becomes the biggest concern over money.

Nowadays, people don’t have much time to spend on home decoration.

That’s why if you are trying to get new window protection but can’t spend much time installing it, go with the frosted glass design method.

This method requires you to buy a tape or a frosted glass spray, and you’re good to go! It doesn’t even take much time, as you don’t have to measure or align anything or use other installation tools.

Verdict

These 6 techniques might be your best friend if you have unconventional window coverings taste. Thanks to the DIY window coverings, you will have complete privacy from outsiders, which will also maintain the natural light flow in your space.

They’ll also provide a touch of elegance to the aesthetics of your room. So, if you’re sick of always keeping your windows closed, hopefully, this article has convinced you to stop.

FAQs

What can I put in windows that will let light in but not allow people to see inside?

You can install a translucent one-way frosted glass film if you want a window film that offers 24-hour privacy. This will let light through but prevent a good view through the glass.

Does one-way privacy film work at night?

One-way mirror films function when the light is brighter on the outside of the film than it is on the inside. In short, it operates when the sun is up. This also implies that the film does not offer the same level of privacy at night.

Does window privacy film work at night?

The window film will provide you with great privacy at night by blocking roughly 95% of the light. It is impossible to look inside during the daytime since the mirror film’s surface will reflect any ambient light.

The post 6 Ways To Get Window Privacy Without Blocking Light appeared first on Ohthelovelythings.com.

©